Category: Hyper-V

PowerShell: Connect Virtual Machines to a New Switch

I have decided to expand on this post a little: https://www.remilner.co.uk/2017/02/22/powershell-list-all-hyper-v-virtual-machines-along-with-the-connected-switch/, which explains how to list all Hyper-V Virtual Machines along with the connected Virtual Switch.┬á I ran into an issue today, where one of the Virtual Interfaces on my Cisco UCS had an issue and therefore required to flip all my Virtual Machines onto…



Cisco UCS Mini Networking Best Practices – Hyper-V

I would just like to say, that this is my own best practice – make sure you do some research elsewhere before you take this as gospel ­čÖé . After recently setting up my only second┬ánew Cisco UCS, I thought I would share some of my experiences with the networking side of the Cisco UCS….



PowerShell: List All Hyper-V Virtual Machines Along With The Connected Switch

Here is a useful PowerShell script, that I have used and is fairly easy to figure, but as ever I like to make a note of it somewhere so this is a good a place as any. ┬áSo my issue was initially that I wanted to find out which of my VM’s were connected to…



PowerShell Script to connect iSCSI Targets

On my old blog, I previously posted this script which I haven’t used in a while but really needed this script to connect four Hyper-V hosts to some iSCSI storage. ┬áDoing the process manually would have taken me about an hour of work, and in the future if the hosts needed to be rebuilt then…